TS 30
The TS 30 bevel gear test stands are used to check bevel gear sets of different sizes for wear and fatigue strength. Electric drives initiate the rotary motion at the drive side (motor) and the brake torque at the output side (generator). This concept makes it possible to operate the test stand in an extremely energy-efficient way.
Range of Application | |
---|---|
Workpiece Data | |
Workpiece diameter (min. – max.) |
50 – 300 mm, 301 – 600 mm (only with shaft angle 85° – 95°) |
Workpiece weight (max.) |
20 kg |
Normal module range (min. – max.) |
1.5 – 5.0 mm |
Transmission ratio (min. – max.) |
1.0 –2.5 |
Adjustable shaft angle |
60° –120° (90° at neutral position) |
Axes X, Y, Z |
max. traversing path of 300 mm |
Drive/output | |
Power |
2 x 156 kw |
Speed range (max.) |
12,000 rpm |
Torque 1 (max.) |
400 Nm at 1,000 rpm – 4,500 rpm |
Torque 2 (max.) |
100 Nm at 12,000 rpm |
Control unit |
Beckhoff |
Cooling unit dimensions (L x W x H) approx. |
2,230 x 1,545 x 2,010 mm |
General Machine Data | |
Machine dimensions (L x W x H) approx. |
4,500 x 3,700 x 3,200 mm |
Net weight approx. |
30,000 kg |
Range of Application | |
---|---|
Workpiece Data | |
Workpiece diameter (min. – max.) | 50 – 300 mm, 301 – 600 mm (only with shaft angle 85° – 95°) |
Workpiece weight (max.) | 20 kg |
Normal module range (min. – max.) | 1.5 – 5.0 mm |
Transmission ratio (min. – max.) | 1.0 –2.5 |
Adjustable shaft angle | 60° –120° (90° at neutral position) |
Axes X, Y, Z | max. traversing path of 300 mm |
Drive/output | |
Power | 2 x 156 kw |
Speed range (max.) | 12,000 rpm |
Torque 1 (max.) | 400 Nm at 1,000 rpm – 4,500 rpm |
Torque 2 (max.) | 100 Nm at 12,000 rpm |
Control unit | Beckhoff |
Cooling unit dimensions (L x W x H) approx. | 2,230 x 1,545 x 2,010 mm |
General Machine Data | |
Machine dimensions (L x W x H) approx. | 4,500 x 3,700 x 3,200 mm |
Net weight approx. | 30,000 kg |
The above-mentioned maximum values were determined for industry-typical gear units.
If necessary it has to be examined whether maximum values can be combined.
Subject to changes.
The machine dimensions of the standard version are for orientation only. The final machine dimension / final space requirement depends on the individual configuration of the machine.